CB 26mm Full Flow Oil Pump (Maxi Pump 4) - flat and aftermarket camshafts

CB Performance Maxi Pump 4

This 26 mm oil pump will allow you to full flow your oil system without modifying the engine case.

The pump cover has a 1/4" NPT outlet on one side and a 1/4" NPT inlet on the other side.

With the Maxi Pump 4 you can mount your filler and cooler in most any location. The 9 tooth gears and anti-cavitation design of the Maxi 4 will provide adequate flow of oil to handle the biggest engines going. The blueprinted pump housing is manufactured from a die casting to assure proper expansion rates to match the engines case during peak operating temperature. The Maxi 4 is a new concept in Full Flow oil pumps. It can be installed without drilling or tapping the engine case.

Expensive engine tear down and shop time is not required, just bolt it in. Oil Pumps are the most overlooked part of an engine. It doesn't make sense to put big bucks and time into an engine and then tack on just any old brand oil pump.

You will also need 2 x 1/4" NPT fittings or AN fittings that can be purchased from me as well.