Stud & Nut Kit Chrome (14mm X 1.5mm to 1/2-20) (Set of 4)

Chrome Stud & Nut Kit (14MM X 1.5 to 1/2-20) - 1 set per wheel

These studs are designed so that they DO NOT require drilling.

1/2" - 20 is the size and pitch of the pre-drilled size of Rotor, 14MM 1.5 is the size of the stud that will go through your wheel.

Make changing tyres a little easier by installing studs.

Easy installation with no drilling required.

Available for use with steel or mag wheels to suit all 4 stud wheels with a 60 degree taper.

When you install any replica wheel on a brake drum ALWAYS make sure the stud doesn't stick through the back of the brake drum and catch on your brake springs. Stock brake drums come in a variety of different thickness depending on if the drum was made in Germany, Brazil, Italy, or any other country.

1 set required per wheel.

4 sets required for the car.