Torque Tool for axle nuts and flywheel gland nuts

Torque Tool for axle nuts and flywheel gland nuts

This is EMPI's version of the famous "Torque Meister" tool and works well.

Please note the following:

• Bolt adapter onto drum, attach torque device and ratchet, tighten or loosen. Be careful not to over tighten the axle or gland nuts
• The gears multiply your force to make the job quick & easy
• The adapter plate for the drum has both common VW patterns (close 4 lug & wide 5 lug)
• Comes with 2 hex shaft driven gears
• One is 12 tooth and it fits a 6 volt flywheel
• The other one is 14 tooth and it fits a 12 volt flywheel and the drum adapter
• Comes with 2 re-usable pins and washers to hold the gears on with while using
• Comes with 1 big 36mm socket opening wrench/gear (torque devise) guide tool
• The torque devise has specs on it: 25 lbs. torque 225 lbs and beneath that: 30 lbs torque 270 lbs.